Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
When we give alternative ways of authentication (local & radius), cisco routers bypass the first method of local & go for radius if the user provided username is not in local database.(aaa authentication login default local group radius)But if first ...
We wanted to terminate a dot1q tagged VLAN at the outside interface of a PIX 501 firewall. But encapsulation dot1q command is not available under interface configuration mode of outside interface.(This method is available for all routers & we tried t...
Hi,Technically speaking you have only 80 users in Sri lanka & only 20 users in Australia. CUCME is sufficient for this small number of users.You can have one CME in Sri Lanka (2851 Router Ok) & another CME in Australia (2811 is sufficient)Connect tw...
Hi Everybody,Routepattern has more Discard Digit options than Route List. In RL DD is available for NANP only.If I am not using NANP , still want to use pre-dot DDI only for some RGs associated with a particular RP , what is the best option? ( I wan...
I tried this workaround for CCX version 7 & it worked fine.replaced whole wfavvid folder of client machine with the original folder of CCX server. Then CCX Editor works fine in client machine in offline mode. ( Then it will not work in online mode)D...
As per your details , seems you are using CME with dual-line. ( I guess this because in CCM maximum calls per line is 4 default)In a shared line , once one phone goes off-hook on this line , it cannot be used by other phones. All calls should come to...
Hi,You can do translation on incoming dial peers.http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801c0a88.shtmlBe sure to match whole DNIS number & not only incoming called-number
