Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
When I initially setup my APs I was told that broadcast SSID had to be on for machines to roam between APs. Now I would really like to turn off the broadcast. Anyone running without broadcast and roaming ok?
Anyone know of any tools to track down the PC of a potential hacker? I've got things buttoned up pretty tight so I'm not concerned, but once in a while I'll get a syslog warning that an unauthorized user is trying to authenticate. Sure would be nic...
The newer firmware on the Helios does have different headings. Here's what I have that is working today
Product Name
2N Helios IP Force
Hardware Version 555v3
Firmware Version 2.6.0.13.7
...
Release Notes for Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switches, Cisco IOS Release 15.0(2)SE and LaterNew in Cisco IOS Release 15.0(2)SE•Support for Resilient Ethernet Protocol (REP) is added for the IP Base package. REP is a Cisco proprietary...
I just got a resolution from TAC on this issue.These settings fixed the issue for 8945 and Jabber clients.Preferred video codecs:Choice 1 : H.264Video codec settings:Video resolution: CIF (352x288)Frame rate: 30fpsVideo Bitrate: 384Video packet size...
I have a number of people running Citrix over Aironet with no complaints. Also, when roaming from one access point to another the Citrix session stays active.
I've had enough problems with autosense to stay away from it all together. Have you set it to 100 full on both ends with any luck? Maybe try a different port on the switch.
