Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm late to this project, short deadline and no real experience with the hardware. Typical story
I've had zero exposure to UCS and Nexus but I have a good understanding of IOS switching. I'm confused as to why the existing solution connects the U...
I am going to use the right-to-use license upgrade and have a question on whether the switches have access to a permanent license for IPServices. I was not involved in the purchase or deployment and dont know what license level has already been paid...
I'm copying an IOS .bin file from my hard drive to my thumb drive so that I can carry it into our lab to do some testing. I get a screen pop with Title Bar: "Confirm Stream Loss". The warning says: The file 'xyz.bin' has extra information attached ...
I've got a 2811 running c2800nm-adventerprisek9-mz.124-22.T.bin code in my lab and I'm simply trying to create an interface vlan without any sucess. Here is the relevant output:Router#show verCisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK...
I'm installing ACS4.2 in our lab domain and want to leverage the corporate domain for authentication. The one way trust is in place, but there is a facet that I'm not clear on in regards to the installation requirement.I'd like to install ACS on a l...
Sorry, I should have been more specific. Index 1 for both switches shows:
Index 1: License Name: ipservices Period left: Lifetime License Type: permanent License State: Not Activated License Count: Non-Count...
It's running FAT32, and I'm pretty certain that moving the file from NTFS to FAT32 is why the value is being stripped away. I'm curious about what the value is and what purpose it serves.
