Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello:I am attempting to use CMS on a pre-existing network of switches. All of the switches are connected and have been managed via telnet since their installation. When I run the GUI to one of the switches and create the Cluster with that switch a...
Hello All:I have looked through all of the documents I can find on the topic and I can't find anything that matches. Also, most of the other configurations that didn't exactly match broke the whole thing in a fairly impressive manner.I have multiple...
Hello All:I am attempting to upgrade the software on my GSR's. I get to the point where the software revision is displayed for the routers but, when I hit "next" I get an HTTP 500 error. Here is the actual log output:[Mon Dec 16 16:24:39 2002] [err...
Hello:I have a series of 3550 switches between a core and edge router that are passing all traffic at Layer 2 (no Layer 3 services enabled on the 3550's). On each of the uplink ports between switches, we have "switchport block multicast" enabled bec...
Hello:I have a working VPN config on my 515 (6.2.2) and can tunnel from a host with a valid external IP with no problem. But, with a NAT'd client, nothing seems to work.I am using TACACS to authenticate after using a group password. Here's the suc...
Hello:I have used that link. It's during the process as listed that the GUI hangs. When I try to add a new cluster member beyond 3 switches it just hangs. I've tried it with different switches, different primary nodes, etc. Mike
GSR 12012 running 12.0.19.ST1 (going to 12.0.23S1)RME 3.4There appears to be some core dumps associated as well. This is Solaris 2.8, by the way, with all required/recommended patches applied.The other interesting note is this appears to happen whet...
Hello:I had done a reinstall of the VPN client and experienced the same thing. I think this fix will work for anyone, particularly those users who had previous VPN client installations.The problem seems to lie in the following registry key (folder):...
Hello:I had similar problems with XP 1, although with client 3.6.3. This is what I found, but your mileage may vary.The problem seems to lie in the following registry key (folder):HKEY_LOCAL_MACHINE\SOFTWARE\DeterministicNetworksOn a reinstall or un...
