Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dears all
i have an issue with registering cisco 7821 phones on CME 10.5 (IOS c2900-universalk9-mz.SPA.154-3.M5) and the phones have software (sip78xx.10-3-1-12) the phone keeps in registering status and dont register at all and when trying to pres...
Dears
i have 2 4507 switches with multiple VLANS, i configured recently the 2 cores with HSRP for redundancy after configuring HSRP clients could not get an ip address even the ip-helper address command is configured under the SVI on all vlans takin...
Dears
i have a customer that wants to activate FCoE on Nex 7700 on a F3 module(N7K-F348XP-25) but am confused with licensing what licensing needed to enable FCoE on the card do i need (Advanced Services Package(N7K-ADV1K9)) to activate the storage ...
Dears
i have a customer that wants to activate FCoE on Nex 7700 on a F3 module(N7K-F348XP-25) but am confused with licensing what licensing needed to enable FCoE on the card do i need (Advanced Services Package(N7K-ADV1K9)) to activate the storage ...
Dears
i have a customer that wants to activate FCoE on Nex 7700 on a F3 module(N7K-F348XP-25) but am confused with licensing what licensing needed to enable FCoE on the card do i need (Advanced Services Package(N7K-ADV1K9)) to activate the storage ...
dear mohit
The CME and the Phones brand new and the phones work just fine before trying to register it to the CME, the moment you try to register it keeps displaying "registering" and when trying to access the setting the message " xml parser error"...
first of all Thanks for the response
regarding your questions i want to answer some of it right now
1. Are the phones able to get IP address and tftp server from DHCP? Check under phone setting or on switch using "show cdp neighbour detail"
Answer...
Hi Shadi, thanks for your support, i reset the CUE and removed licenses information in the CUE and i managed to solve the issue .. but i have another issue now the default VM-IVR-PORT licenses which comes with the CUE is also removed and am working n...
thanks j.huizingai followed your recommendation with no luck even a message appears on the CME "*Apr 19 12:30:52.330: HTTP: Priv level granted 15"but the CUE wizard fails to authenticate
