Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I wanted to know the max number of OSPF routes (in a normal area) that can be handled without any issues in a Cisco 7500 and a Cisco 10K router.Thanks.Imran
Hi,Is there any way to generate traps for SONET alarms on the cisco ESR 10000 series router. I would not find a sonet option as with the 7500.Thanks,Imran
Hi,Do cisco routers (10K,GSR,7500's) assign labels per vpn route ?Can they assign label per vrf ?The reason for this query is my concern of scalability when using Option B (RFC 4364 Sec 10.) as compared to Option C. ThanksImran.
Hi,We have Cisco 7500 series routers. A lot of customers links are connected to the cSTM1-1 interfaces of the router. For this reason I have turned off the link up down trap but I need to know if there was a way I could generate a trap that would ind...
Hi,Am having trouble getting the line protocol up when trying to connect a customer over an ATM link. The customer has a nortel router. Any specific parameters to be configured.Don't have this issue with other customers using Cisco routers.Thanks Imr...
Hi,Appreciate your reply. Well I had a word with our Cisco Field engineer and the workaround for this is to enable the snmp traps for link up/down and then use the snmp trap filter snmp ifmib trap throttle This would only generate traps for the main ...
Hi,Here's the Cisco 7500 router configinterface ATM1/0/0.5 point-to-point description CUSTOMER ip address X.X.X.X 255.255.255.252 ip verify unicast reverse-path no ip directed-broadcast no ip mroute-cache no atm enable-ilmi-trap pvc 11/100 vbr-nrt...
Hi,I faced a similar problem where I would see all the routes in the VRF but was not able to ping the IP's.Try to define the bgp next-hop on the VRF on the PE router.The config would look something like thisip vrf abc rd xx:xx route-target export xxx...
