Hi All, We are looking at having Lync and Jabber running in unison. Currently I have intra-Domain Federation working and playing nicely. I am now looking to extend the capability of the federation by enabling Jabber users to access Lync federated...
Hi, I was wondering if there was something special reqiured to register mobile Jabber clients to the CUCMBE 3K, all the Doco I have read thus far seems to indicate that it is supported so I thought I would give it a shot as I have a spare enhance...
Hi, We are having issues registering Jabber video 4.4 clients to our VCS. The VCS is in a NATted DMZ, but there is no NAT between the Movi endpoint and the VCS. We have managed to register an EX90 unit, but the Jabber client always fails with "d...
We are looking at deploying a few of these, we are not using the 3G so much but more for its rugged nature. What I can't find is some actual routing throuput statistics or information. Is there anyone who has worked with these that can give me an ind...
Hello, I have recently upgraded the firmware on our 7921G wifi phones, from 1.1(1) to 1.3(3). To authenticate against the correct wlan we import a backup.cfg file and it imports the correct ssid and key etc. The issue is that after the import...
Hi ,
I am currently experiencing a similar delay issue on my VC units with proximity wireless content sharing.
Do you have any information in regards to how you managed to lower the delay on the TV's? As we only have TVs and not projectors...
Hi Not sure if it's a free or paid version.However it still appears and functions on my windows mobile client (not windows mobile by choice ) . And I am on the Freemium Spark version. But considering the only difference between freemium version and M...
Hi Alicedes, If I were you I would probably start a new thread here on the forums. As the issue you have is not quite the same, it is likely something to do with the authentication settings between zones on the expressway and contr...
Hi, Unfortunately I found no way of getting this to work. So if you are in a situation where you have Lync and Jabber on the same SIP domain, there is no way I found to get Lync to contact XMPP federated partners through CUCM IM&P. This was...