Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I am using AnyConnect Secure Mobility client 3.1.01065 for Mac OSX connecting to VPN with an remote ASA. Once it's connected, I cannot resolve any devices on my LAN anymore. It seems like all the LAN DNS request get sent to remote VPN site instead...
Hello,we have a very simple deployment of UC560 with 4 FXO lines with SPA504G phones. Users cannot tell if there's voicemail or not since the red light on the phones don't lit up nor an envelop icon show up on the phone... The notification on CCA is ...
Hello, here's the setup:We have a PTP wireless connection (25Mbps) between 2 buildings about 150M apart. There's a router at each site connected to the antenna.site 1 :data vlan 1 192.168.1.2/24 (UC), gw 192.168.1.1 (PTP router 1)voice vlan 100 192.1...
Hello,we have 2 offices next to each other and connected to each other with a direct connection. So virtually the network falls on the same subnet. We are putting in one UC560 on each office(UC1 and UC2), each system has 4 FXO lines coming in. So we ...
Hello,I am looking for a standalone AP that can have seperate guest SSID. We have about 20-30 devices connected on a given day. I've looked at 1140, 1260 but not sure what exactly the differences are besides one has internal antenna. There are also o...
We tried with the UC WAN port only to the router but the computers on the 2 data VLANs cannot talk to each others except from 192.168.1.0/24 to 192.168.2.2 (UC) or 192.168.2.0/24 to 192.168.1.2 (UC). They can't get the other computers, servers, or...
site 1 :data port 1 on vlan 1 on UC vlan 1 192.168.1.2/24 (UC), gw 192.168.1.1 (PTP router 1), connected to a cisco switch, and a port of the switch connects to the route on port 7 w access to vlan 1 on the PTP router.voice vlan 100 192.168.101.2/24 ...
Hi David,Thanks for your reply. So if we setup UC1 192.168.201.0/25 vlan 100 and UC2 as 192.168.201.128/25, then setup multisite config with CCA, it should work? Would it cause any problem if we leave the data vlan 1 192.168.1.0/24 on both UC1 and U...
