Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello guru's. I'm a voice guy so I'm a little outside my comfort zone but recently bought a 5506 to replace my outdated 5505 at home. I had older code running on the 5505 - I think it was 8.0. Anyway, things have definitely changed with the new fi...
Wondering if any security/firewall guru's out there can shed some light on this. I have an ASA5505 that's acting as my default gateway for all the machines in my network. I have one unmanaged gig switch behind it that has a couple machines connecte...
So I was poking around my ASA5505 today and noticed the port I have connected to my 1242AP had a ton of switch ingress policy drops. ASA's been on for about 10 days but there are around 12 billion of them.I read something about the vlan interface na...
I can't figure this one out. I have an ASA5505 at home that I use for VPN access. Occasionally when I connect I can't ping anything. I check config and it shows:no crypto isakmp nat-traversalI've configured "crypto isakmp nat-traversal" so many ti...
I'm testing b-acd through a gatekeeper and came across something weird. Call flow is:CME1----gatekeeper-----CME2(b-acd script)When I put a call into the BACD script, an extra call shows up on the gatekeeper. Here's the output:router#sh gatek callsT...
It's a bug with 11.5. CSCva82202. List.xml.sgn should be automatically created when you upload a new List.xml file to the server. It retains the old version which is why new background images don't show up on the phones. The only way to fix this ...
Not sure. The first TAC engineer I got told me I needed Premium and sent me down the road to get a temp license. Later during a meeting with my client and Cisco AS, it was mentioned that Enhanced would work as well. That was the last I heard of it...
Update: This does, in fact, work on CCX 8.5. We found out the application manager was failing because Java was not licensed on the server (we're running Standard). We ended up getting a temp license for Premium to enable Java and it's working corr...
Good doc, but it doesn't work on CCX 8.5. Page 5 - updating the SET command for getBATConfig errors out with:Unable to parse expression; mismatched authorization code: <code1> and <code2>If I replace <code1> with <code2> I can get the SET step to s...
