I do not see any certs on the WLC's (5508) however I do see certs in the ACS used for authentication. 2 places, Users and Identity stores\external identity store\certificate authorities, and also one in System administration\local server certificate...
Hello, I have 3 open slots for this SPA, I insert 2 and they work, when I insert the third one it doesn't come up. Is there something I am supposed to do for the third one to lite up?
I have allowed all IP to the ISE servers from the DMZ the Guest 5508 WLC sits. I see requests coming in from a WLAN configured on the inside WLC but nothing from the SSID that comes from the WLC within the DMZ it is a mobility anchor for the guest ne...
Hello all, I am looking at adding a bunch of the 3702s to the network. I am upgradeing the 5508 WLCs to FUS 1.7 and 1.9 then I will upgrade to IOS 7.6.110 for this. I am in need of configuration guide for the 3850 piece. Will I be able to get the fu...
Hello all, we had a module go bad in the N7K, I have a new RMA part here and will replace it tonite. I am wondering how to down this device? I havent seen it yet :) only remotly from ssh sessions. Does it have power switches? Is there any command ...
Maybe this will help? http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/enterprise-ipv6-solution/white_paper_c11-676278.html Do you wish to nat the ipv6 to an ipv4 address?
Did you do a software install from the command line and point it to the file on the usb drive? I had to do that once on a 3850. What is in flash? can you do a dir flash and post the results?
Download the ver you want to use onto a flash drive, then use it to load the ios, after it loads you can copy the ios to flash. http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3850-series-switches/deployment_guide_c07-727067.html