Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi.
Im have downloaded the CNR 8.3.3. (prime network registra 8.3.3.)
Im am look at upgrading from 8.1.3.
All works fine(until now), but our TCL scripting fail on one function : clock.
The CNR log says :
01/07/2016 13:41:28 name/dhcp/1 Warning Exten...
Had same issue - 5 out of +100 BGP sessions did not work propperly - NSR flapping - did a "ipv4 mtu 1524" on the sub interface. - no more BGP NSR issues in the log ... ASR9K software 6.6.3 - why only the 5 BGP sessions did it, i dont know - the 5 whe...
So ... 2025 ... and this was spot on again... - remote router (Cisco ASR920) - Tech says Console is ok on console server. - i did send delte config commands, and a reload command. - at the boot i do not see logs from the boot-up - after the boot the...
Hello,I think you can copy the file to the "non-admin".Do a dir from admin mode:dir harddisk: location 0/RP0/CPU0/VM1 -> to see the harddisk: of no-admin.Copy the file from admin to nonadmin:copy harddisk:/showtech/xxxxx.tgz harddisk:/showtech/xxxxx....
