IntroductionThis article contains a small video to show how to collect call logs and packet capture from the TC Endpoints. Requirement1) Web Access to the TC Endpoint.2) Telnet/SSH Access to the TC Endpoint. (Here, I have use Putty software to t...
Hi Jakub,
Please refer to the following configuration setting of the DX series device on CE version based on its Admin Guide:
UserInterface OSD Output
Define on which monitor the on-screen information and indicators (OSD) should be displayed. Requir...
Hi Marius,
I was going through your above question/issue, and found it very interesting to see that the MainBoard Identifier value in your case has a tree-like structure of the object level.
When I say object level, I am referring to the value return...
Hi Charles,
I was reading your this issue regarding the critical warnings you were seeing related to VCS Gatekeeper on TMS.
If the issue is still unresolved, please check the FQDN settings for your VCS as suggested below by Patrick, and also check wh...
Hi Nick,
For now only SQL 2014 is supported for TMS. Plan for SQL 2016 server support will be most likely for future releases but not for the immediate release that is TMS 15.5.
Release Notes for TMS 15.5:
http://www.cisco.com/c/dam/en/us/td/docs/te...
Hi,
To confirm why exactly the registration is being rejected, please do the following:
1. Please make sure you are able to ping the VCS IP Address from your codec. It should be accessible.
**systemtools network ping**
2. Please make sure that you ha...