Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm getting the following error msg when booting.No images in /Error 15: File not foundunable to boot an imageSo I'm trying to use tftp in rommon mode but I can not ping anything from either ASA -> laptop or the other direction. I'm not sure I have ...
I'm trying to setup remote access and after reading the cli config guide, I'm getting confused. What is the difference in the placement of the vpn-tunnel-protocol cmd? group-policy xxx internalgroup-policy xxx attributes dns-server value xxxxxxx vp...
What is the difference and which is preferred?group-policy xxx attributes vpn-tunnel-protocol ipsec svcor group-policy 123 attributes vpn-tunnel-protocol ipsecgroup-policy 456 attributes vpn-tunnel-protocol svc
Does anyone know if there is an excel template that has basic router or switch configuration commands where all you do is type in the value or option then it exports into text or csv? I'm not interested in gui interfaces. see attached..It probably do...
Can the NCE module support a primary and failover connection? ie. NCE connected to T1 as well as WWAN (3G Wireless) as a backup? 1841 or 2811 ISR AIM-TPO-1 or AIM-TPO-2
I got it working.After performing the rommon/tftp steps listed above, booted the image:1. formatted flash again2. configured the asa int and gateway3. copy tftp: flash:4. write mem
show ruciscoasa# show running-config boociscoasa# show running-config boot ciscoasa# dirDirectory of disk0:/1374 drw- 0 10:27:14 Mar 30 2009 crypto_archive1368 drwx 0 10:27:01 Mar 30 2009 log0 bytes total (0 bytes free)cis...
I made the following changes:GATEWAY=10.10.10.2IMAGE=asa804-23-k8.binI successfully tftp the image and booted the asa. I did a write mem and reload and it boots back to rommon mode. So I then, erased disk0: and tried again with same results.I then do...
I agree that using both hardware and software firewalls would be more secure, I also agree that using a hardware firewall by itself would be much easier to manage. From what I read on your query, what about using an ASA5505? With the features you ge...
