About x_plana01

x_plana01 · 03-25-2011

Hi folks,I recently noticed OSPF behavior, which I don´t understad - routes are in routing table, but I don´t see them in OSPF database.s100_unl_vtp#sh ip route 10.100.254.1Routing entry for 10.100.254.1/32 Known via "ospf 100", distance 110, metric...

x_plana01 · 10-15-2008

Hello, I am trying to redistribute BGP routes to OSPF. BGP and OSPF is running on PE router, OSPF only on CE router. Routers are connected via IP tunnel.I have following configuration:PE:router ospf 120 vrf szdc_global log-adjacency-changes redistrib...

x_plana01 · 03-05-2008

Hi everyoneI am using NBAR on my 7206VXR box to mark RTP stream to DSCP EF and SIP to CS3. Marking of SIP to CS3 works fine, but I got problem with RTP marking. Sometimes output packet are NOT marked, altough the output of policy-map applied on the i...

x_plana01 · 03-03-2008

Hi everyoneI am using NBAR on my 7206VXR box to mark RTP stream to DSCP EF and SIP to CS3. Marking of SIP to CS3 works fine, but I got problem with RTP marking. Sometimes output packet are NOT marked, altough the output of policy-map applied on th...

x_plana01 · 03-21-2007

Hi, I was just wondering - I have 2 exactly same c3560 switches with IP services IOS image, but one reports itself as standard image (WS-C3560G-24TS-S), and the other as enhanced (WS-C3560G-24TS-E). What?s the difference?Regards, Martin

x_plana01 · 03-25-2011

Hi Peter,thanks for answer. So I understand it wrong, the network is indeed present there.Have a nice day!Martin

x_plana01 · 10-15-2008

Yeah, sure, I can use route-maps to filter prefixes, which I need to redistribute. But if I don't use any route-map, all prefixes should be redistributed by default...? Or am I mistaken here?

x_plana01 · 01-26-2007

Hi,as ususally, the problem has been solved two minutes after I posted my message :))To your questions: Yes, routing table is OK, all networks are correctly distributed. The tunnel is terminated in VRF on both sides.The problem was in "IPIP" tunnel m...

x_plana01 · 09-15-2006

Thanks for all replies,it was actually my mistake - there was "no service dhcp" set on c4503 (probably something from old configuration)  Sorry for bothering... have a nice weekend.Martin

x_plana01 · 09-15-2006

Hi Ankur,yes, of course I can, there is no problem with IP connectivity at all.Martin

Member Since	‎08-03-2006 12:56 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	12

User Statistics

User Activity

Routes in RT, but not in OSPF database

BGP to OSPF redistribution

NBAR problem - packet marking

NBAR Problem - packet marking

c3560 standard and enhanced image

Re: Routes in RT, but not in OSPF database

Re: BGP to OSPF redistribution

Re: VRF-lite on c3550

Re: DHCP on different network segments

Re: DHCP on different network segments