Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have call manager behind Cisco Firewall Service modules that do not support multicast.The phones are secured by an ACL and are not behind the FWSM.In this config, will push to talk work?Are multicasts streams limited to the phones themselves?Is it ...
Is there a way to create and pre-populate Groups in Personal Communicator/Jabber so end users do not have to create groups in their clients and add contacts?example: IT Group, HR Group and Facilities Group and the respective employees already in tho...
We are using 7921 phones over our wireless network with A, B and G APs. The phone is set to Auto-A and the APs are broadcasting the SSID over A and G bands. We are seeing the phones pick the G band 90% of the time. We restricted the SSID to the A ...
Environment: 4 node cluster, with dedicated Pub and TFTP Server and 2 active Subscribers. We use a large quantity of Vg248s and 224s and have 2 PSTN gateways with 4 PRIs.I am having trouble getting OP to Monitor all the devices. I am well under the...
Any documented solution for this task?As I see it, it will take 4 BAT jobs:1. Export the phone details and modify the CSV to include Owner IDs2. Run a BAT job to delete the exisiting phones3. Run a BAT job to re-add the phones with Owner IDs (fro...
No, I did not find a reason why; I simply downgraded to the earlier firmware. I did this by going into CM and specifying which firmware to use and this pushed it down to the phone.Device>Device Settings>Device Defaults and change name to the older f...
