Hi, I have configured MLP over PPPoE and ADSL. Though theconnectivity is up, Interleaving is always reports as disabled on BRAS while CPE is enabled. The ppp session also goes up/down about every 2 minutes and i think due this problem.Without interle...

Hello all,I'd like to know if there is a way to define the maximum number of bundled ethernet channel on a 3750 switch.I found the command "lacp max-bundle" but it seems doesn't work on 3750. Is it correct?Thansk a lot,Milko

Hello all,I'm using a cisco 2811 IOS c2800nm-entservicesk9-mz.124-5.bin with 4 VWIC-2MFT-E1 modules connected with eight E1 atm link configured with 2 ima groups.Even if i've replaced wic and cables i continue to receive these error:*Aug 29 13:50:19....

Hi all,I'm trying to setup a LAC to make pppoe relay.The LAC is connected in one side to a wifi bridged network and on the other side to the LNS by an ATM link.When a client try to establish a pppoe connection, on the LAC i always receive the followi...