About columoconnor

columoconnor · 11-30-2010

Does Cisco have any products for in building cellularextendingthanks

columoconnor · 07-29-2010

I have a Callmanger 4.0(2a) and want to upgrade to CUCM 8.....Is there a path for this?thanksColum

columoconnor · 02-04-2009

I have CME 7.0 and a hunt group with two members in the listIs the a way to make the group keep cycling so that it is always ringing....dont want call to get to voicemail...thanksColum

columoconnor · 01-22-2009

I have an FXO port on and mgcp gatewaycannot see why phone wont ringdebug ouput attchedany help will be appreciated debug voice ccapi inout

columoconnor · 11-24-2008

I have a SIP trunk between CUCM 6.1 and the provider. Inbound calls work but outbound calls fail. The provider says I need to send UDP 5060 and i'm sending TCP 5060 but i dont see where i can choose udp or tcpappreciate any helpColum

columoconnor · 07-29-2010

thanks for the responseSeems like it would be easier to install new with 8.0 and reconfigure ...Is there a way to do this without purchasing new licensesthanksColum

columoconnor · 06-01-2009

you need a access-list applied to dmz int in to allow dmz to inside

columoconnor · 02-06-2009

I would not take no value in the timeoutthanks for the info on the callblast

columoconnor · 02-06-2009

It would not allow me to point the final to the hunt listthanks

columoconnor · 01-22-2009

That was itworked afer the dial peers were deletedthanks

Member Since	‎12-06-2002 06:39 AM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	41

User Statistics

User Activity

RF Distributed Antenna System

Upgrade Callmanager 4.0

CME hunt group loop

FXO port wont ring phone

SIP trough ASA..no outbound calls

Re: Upgrade Callmanager 4.0

Re: ASA 5510: Want to have traffic between Web, DMZ and Inside N

Re: CME hunt group loop

Re: CME hunt group loop

Re: FXO port wont ring phone