Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello guys, I need your help. I have 5 switches cisco CBS 350-POE.I have to configure the RSPAN to monitor all the vlans (1,10,20,110,200) on all the switches. The switches are A - B - C - D - E and are connected in this way:configuration on A - B - ...
Good morning,I have a Cisco IP Phone 7911G and can't figure out how to configure it.I just updated the firmware "7911/7906 SIP IP Phone firmware files only - Compatible UCM versions 4.3.2, 5.1.3, 6.0.1, 6.1.3, 6.1.4, 7.0.2, 7.1.2 and above ", but fro...
Hi every, I try to create stacking beetween SG500-52P and SG500-52MP.
Same firmware : 4.6.8.0Stacking tupe : native
When i connect cable SFP to create a stacking, SG500-52MP become master and works, instead SG500-52P become slave and instantly after,...
Hello, I have a SG500X.
I have activated the DHCP server, but I need to add the option 66 dhcp.I must add a text type: "http://192.168.150.150:5000/provisioning/0xxxxxxxxx/$MA.xml" but the cisco will not let me. it seems that only accepts hexadecimal...
Hi Balaji, the switches A - B and C are connected to the switch D (on ports 22 , 23, 24) which is connected to switch E on port 20The configuration isinterface GigabitEthernet1/0/20switchport mode trunk!interface GigabitEthernet1/0/22switchport mode ...
