perptech1
Level 1
Level 1
Member since ‎06-15-2010
‎08-18-2017

User Statistics

  • 44 Posts
  • 0 Solutions
  • 5 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
40 Discussion Posts
5 Discussion Posts
30 Discussion Posts
20 Discussion Posts
First Discussion
First Question
10 Discussion Posts
1 Reply
20 Replies
10 Replies

User Activity

I have an HP DL380 with a 10GB CNA.  I was testing pulling down large files (3GB) with my laptop connected via 1GB but the throughput is horrible.  Below are the stats on the Nexus.  I know my laptop disk is a bottleneck, but shouldn't be that much. ...
We're getting a Nexus 5548 w/10GBASE-SR SFP Modules and will be connecting them to HP DL380 Gen 8's with DAS using HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapters. I'm trying to get most of the configuration done ahead of time, but wondered if I need to...
I am trying to allow hosts on a single switch to communicate with an ISCSI SAN, but block the hosts from communicating with each other.  Can you tell me if the below configuration will work?  All hosts and SAN NIC are in the same VLAN and host MAC's ...
I have a client using Snort with a 3 port NIC, but only one port is seeing TCP traffic.  Below is the switchport configurations and a TCPdump.monitor session 1 source interface Gi2/0/1 - 3interface GigabitEthernet2/0/1description SPAN_VLAN50switchpor...
I implemented an ASA5505 on an access switch on a network with a single data vlan1.  When I put the device online, none of my ACL's were being matched.  I was wondering if someone could look at my configuration and let me know if I'm missing somethin...
Community Statistics
Member Since ‎06-15-2010 06:45 AM
Date Last Visited ‎08-18-2017 03:56 AM
Posts 44
Helpful Votes Given To