Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Afternoon all,I've a need to populate an FMC 7.3.1.1 with the tags from Azure Service Tags https://www.microsoft.com/en-us/download/details.aspx?id=56519I'm trying to create a network object group which contains the IP addresses of all the entries fo...
Morning peeps, Does anyone have any good resources for routers using Zone Based Firewalls and applying QoS policies to the IP interfaces of such?Or is it simply the same as a router using Classic IOS Firewalls?RegardsPaul
Hi Guys, I'm really interested in getting an idea of how to use EEM Tcl scripts or other method to get PoE for our phones switched off at night to save power. Does anyone know if there's any whitepapers on doing this? I saw the idea on a Cisco slide ...
Hey chaps and chapettes.As the title states, what's the command to track connections through an IOS 12.4 Router with Zone Based Firewalling enabled? I'm used to getting good output from sh conn and sh xlate on my ASA but I've never tried to do the sa...
Hey, When I upgrade a router which was originally shipped with the c180x-broadband-mz.124-6.T7.bin IOS to a c180x-advipservicesk9-mz.124-11.T2.bin IOS the router doesn't function as I expect it to. Layer2 seems screwed and I'm not getting any arp ent...
After using the Cisco Firewall Migration Tool (FMT) to move config from an ASA to the FMC, the tool has worked around the object-group size on the ASA by creating numerous object-groups which contain no more than 100 literals in each.So, I'm aware th...
The question looks like it's hindered by a further limit on literals supported in a Network Group object."Network group object 'AzureActiveDirectory_Public_20231009' contains too many literals. Network group object supports upto 1000 literals only. P...
I agree with Maykol, Your ASA has no route to any network other than the connected subnets as the output of Packet Tracer suggests. Enter the command :-ip address pppoe setroute Under your VLAN 2 interface and you should be good to go. A Technote des...
Hi there, Can you enter the following command on your unit :- packet-tracer input inside tcp 192.168.1.10 8888 208.208.208.208 80And if you can't interpret the output of packet tracer, post the output here for us to see. RegardsPaul.
Hey, In your config you have :- !interface Ethernet0/5switchport access vlan 12!Should this not be !interface Ethernet0/5switchport access vlan 1!RegardsPaul
