Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Does anyone have a reference to how far apart an Aironet 1410 Bridge can be from the Power Injector (Dual Coax feeds). I just can't find the specification details. The device comes with a 20' and 50' F-type and I'm looking at 150' runs for both end...
I am looking at attaching Cisco IP Phones to a Cat6509E on WS-X6148A-GE-45AF line cards. The IP Phones will not share a port with a PC/Device but all devices connected to line card access ports will be in the same Vlan.I have QoS enabled and have cu...
I am having issues configuring PVLAN using just trunks.Here's the secenario... two VLANs are being trunked from a 3560 to a 4503 (VLAN0030 and VLAN230). From the 4503 I have a port trunked on to an upstream 2811.I created a primary Vlan (VLAN0003) a...
We have AP1210's trunked to 3550/3560 access switches which are inturn trunked to two wireless core 4006 switches.RSPT is configured on all switches. When a topology change occurs, RPST is very fast in moving the root port (~1 sec) but the designate...
The 3560G-48TS SFP slots only support GLC-SX-MM, -LH-SM, -ZX-SM Fiber transceiver modules.If you need Cat5/6 RJ45 connections you could connect and access port or trunk a port or two out to your next network device.http://www.cisco.com/en/US/docs/int...