Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I have created a Public Server config and it has created an auto-NAT of the following:
object network IP.10.xx.2.122 nat (Inside,Outside) static IP.164.xx.11.11
I also want to be able to PAT on my inside interface so the traffic knows
to return ...
We upgraded our VM ISE from 1.4 to 2.2 and since then authentications are successful
but we can see no information on the dashboard? I have included an attachment to show
issue, I have tried resetting the M&T DB and a few other app options and reboot...
Hi Gents,I have taken this excerpt from the QOS SRND for Campus Design: "Queueing algorithms are activated only when a device is experiencing congestion and are deactivated when the congestion clears" my question is - What if you have a Gig interface...
In the attachment I have a common Core-Server Farm setup with Etherchannels linking all devices including server 1 and 2 using RPVST and Router 1 as the root for VLAN 100. We are copying a large amount of data from server 1 to server 2. I have done a...
Hi,The following excerpt is taken from Cisco documentation: The WS-X6548-GE-TX, WS-X6548V-GE-TX, WS-X6148-GE-TX, and WS-X6148V-GE-TX modules have a limitation with EtherChannel. For EtherChannel, the data from all links in a bundle goes to the port A...
Jon, you are a gentleman!Thank you, yes I had done everything as you had mentioned EXCEPT allowing the specific vlans over the trunks to the Edges.I had configured each link as a trunk and was allowing all the vlans through, hence when i shutdown Fa0...
