Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Just a question - is it safe to plug/unplug V.35 cables (with powered on CSU/DSU on at the end) on serial interfaces (WIC-2T, WIC-1T) when the router is powered-on? So far, to be safe - what I have been doing is powering down the router when plu...
Can you suggest a software which can automate the backup of multiple Cisco routers/switches? This is most useful especially when you have a lot (50+) Cisco devices.Thanks.Best,Tony
Hi,I have a Cisco 3725 with Etherswitch NM-16ESW. I was able to configure an IP address on one of the Etherswitch's port before but now:C3725(config)#int f1/2C3725(config-if)#ip addC3725(config-if)#ip address 10.0.8.28 255.255.0.0% IP addresses may ...
Hi,We have en existing Internet connection using our Cisco 3725 router (ISP A). The router does the NAT and here's the existing default route:S* 0.0.0.0/0 [1/0] via 1.2.3.153This router has a "16 Port 10BaseT/100BaseTX EtherSwitch".Now we have a new ...
Hi,We have en existing Internet connection using our Cisco 3725 router (ISP A). The router does the NAT and here's the existing default route:S* 0.0.0.0/0 [1/0] via 1.2.3.153This router has a "16 Port 10BaseT/100BaseTX EtherSwitch". Now we have a...
Hi Edison, Rajib,Thanks for the kind reply. I want to limit the downloads on the Linux Internet Gateway box (see diagram on my first post) to 4Mbps - which means I must limit on the outbound direction from the 3750 switch.Here are the relevant config...
Hi Lee and Narayan,My company's requirement for doing BGP is to multi-home - to provide us with redundant inbound (for our servers) and outbound (for our company's users) Internet connectivity. From my readings - it would seem that to be able to mee...
To everyone who replied to my post - thanks a lot! Learned so much. Anyway, I used iperf on the two WinXP machines and I was able to get about 749 Mbits/sec. Again, my thanks to everyone.
Yes - you are correct - sorry about this. It is 190 Mbps.When I tested on the Fast Ethernet ports of the switch, I was able to get about 86 Mbps when doing file transfer between the two Windows XP machine.When I tested on my Linksys wireless router...
