Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'd like to create a vPC between two Nexus N9K-C93108TC-FX3P . I have two QSFP-100G-CU1M DAC cables compatibles (https://tmgmatrix.cisco.com/?si=N9K-C93108TC-FX3P)
However, the status of my ports is always 'DISCONNECTED'.
Note: I have no issue wh...
Hi,I have the famous " %DTLS-5-SEND_ALERT: Send FATAL" error on an AP. Impossible to join the WLC.I read a lot of comments on this but no solution for this case. Any idea ?? You can find the tests done on a 2504 and a 3504 on my lab: My Devices:- 1 ...
Hi,I noticed that some Cisco GLC-T stay definitely in a down status on Nexus5548 (System version: 6.0(2)N2(1)).To test, the basic configuration is :interface ethernet 1/7 speed 1000 switchport mode trunk I have 4 different versions of Cisco GLC-T (...
ON WCS, I'd like to configure an ACL by using a template..When I go to Configure > Controller Template Launch Pad > Security > Access Control > IP Groups,we can find, normally, a group named "any" to use in the rules.On one of my WCS, this 'any' gro...
Hi,I've noticed a failed reverse question when using the CLI "saveconfig" command on WSA, version 7.5.0-833It doesn't appear on ESA 7.5.0 version 7.6.1-022 nor when using the GUIPrior to version 7.5 > saveconfigDo you want to include passwords? Plea...
Hi Christian,It's a long time this discussion has been opened.Did you manage to get an IP address from the Local DHCP server (WLC) for guest users on branch ?I'll be interested by your feedbackRegards, Hervé
Hi,I'd like to thank all of you for your answers and particularly Nagaraja.First, I configured my PC with the PIX IP address (INTERNET) and connected it directly to the router. The PC can receive DNS requests.When I reconnected the PIX to the router....
