About dgroscost

dgroscost · 09-22-2009

Not having much luck getting this to work and searching the forums here everybody seems to say it is not possible unless TACACS+ is used. Is this still the case? I see the AAA/ACCT/CMD in the debug on the local switch but the RADIUS server never re...

dgroscost · 05-08-2009

I can't seem to find any information regarding mass rollouts of Cisco IPS 4240 devices. I have 6 devices I intend to roll out to several remote offices and tie into a centralized Cisco MARS appliance. Without using any CSM/LMS software, is there an q...

dgroscost · 10-19-2008

I would like to get some feedback to this design:2821 - ISP1 (MLPPP NxT1)2821 - ISP2 (T1)1 ASA FWBGP announcing ISP1's /24 block over both ISPs.Thinking of running GLBP on 2821 routers thus giving the ASA a single default (redundant) route to Interne...

dgroscost · 09-22-2008

Anybody ever wrap a VPN tunnel around an HWIC-3G-GSM module using ATT 3G cellular connectivity? I have decent speeds over their Laptop Connect (3G) service over a VPN client session, just curious how well these cards have worked out for others. Obv...

dgroscost · 07-22-2004

I can connect from the internet and VPN in, but I can't ping the internal LAN - even the internal router address I am connecting to.Please advise - thanks!Config off Cisco 831 router:version 12.3no service padservice tcp-keepalives-inservice tcp-keep...

dgroscost · 06-04-2012

You can try to use a floating static route but that may not be best design. What routing protocol are you using for the MPLS routes? Is it EIGRP as well?

dgroscost · 05-31-2012

Have you tried applying the service policy to the physical interface?

dgroscost · 05-19-2009

Is it possible that your cable provider sold you a package (such as SoHo) that does not allow VPN usage? I know with some cable companies the lower end packages do not allow for VPN connectivity - just a thought.Config output would be helpful.

dgroscost · 05-19-2009

If you have physical access to the router you could always power cycle it :-)I don't believe there is a way to do this without having administrative access (or physical access) to the router w/ the outdated cache entry.

dgroscost · 05-19-2009

Also noticed higher CPU loads and missed packet % in v7.

Member Since	‎07-22-2004 08:42 AM
Date Last Visited	‎01-25-2023 12:06 AM
Posts	55
Total Helpful Votes Received	8

User Statistics

User Activity

Command accounting w/ RADIUS

Deployment of Cisco IPS 4240 devices

Internet redundancy (2 2821, 2 ISPs, BGP, GLBP?, 1 ASA)

Backup VPN using HWIC-3G-GSM technology

VPN connects, but can't ping inside interfaces (local LAN)

Re: EIGRP and Static Routes backup

Re: MARKING A TRAFFIC WITH AF31

Re: ISP - Routing of private addresses

Re: Router ARP Timeout problem

Re: Cisco IPS Ver 7.x problems???