Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have been trying to figure out something with one of our access-lists and have a questions that I'm hoping someone can help me out with. if I create an access list like this:ip access-list standard ROUTED_NETWORKS permit 10.10.70.0 permit 10.10.17...
I was reading through some documentation regarding the Cisco CSS 11501 and am a little confused and need some clarification. We currently have a pair of CSS 11501 (CSS11501S-K9) running in active/standby mode for external load balancing. Everything...
Greetings - Does anybody know if the modules on a 4510 are both hot-swappable and plug and play? We have some 4510's and have found that we need to add new modules to get more available ports. I just need to know if I will need to shut the switch d...
I need to change the tunnel IP address for all of our remote sites that connect via DMVPN. I'm trying to figure the best way to accomplish this while causing the lease impact on users. My theory is that I could create new tunnel interfaces using th...
I'm in the process of setting up our new ACS 4.2 server. It is version 4.2 Build 124, running on a Windows 2003 server. I'm having some issues with enumerating groups and just cannot figure out what I'm missing. We have 7 different domains, and I ...
Thanks Rick. The access-list is only defined to limit what we send to the WAN via eigrp. Here is the statement from the eigrp process: router eigrp 65082 redistribute connected metric 200000 20 255 10 1500 route-map connected-eigrpredistribute stat...
Thank you for the response. It sounds like the hardware that we have (CSS11501S-C-K9) is affected by the EOL and that we need to replace it with either the CSS11501S-C-K9 or the ACE appliance (4710). Either way not a real fun proposal, but I'll get...
Thanks Tim, I appreciate it. Could you elaborate on what you mean to migrate one then the other? I don't see how I can migrate them without taking the tunnel down.
Thank you so very much. I think that it was the DNS suffix section that I must have missed. I had already done everything else you listed. I added the different domains to the DNS suffix settings and now it looks like I can enumerate the groups. ...
