Hi Guys,Need urgent comment can tengig module transceiver at 1 end and 1 gig transceiver at another are compatible and link can come up. Model: WS-X6724-SFPType: 1000BaseSX ----------------------------------- Model: WS-C4948-10GE-X2Type: 10GBase-SR...
Hi Guys,I have NME-AIR-WLC25-K9 module installed in cisco 3945 , can some one guide me how to access and configure this thing.Thanks in advance.Mohseen Patel
Hi Manu,Creating new Vlan on both switches wont get any impact.But be careful if you Vlan allow list on VPC peer link or VPC member link were you need to flow this new created vlan. Br.Mohseen
Hi Raed, Refer to below link to activate temporary licence or you can also get get temp licence by contacting Cisco licence team. But temporary will last for limited period.http://www.cisco.com/c/en/us/td/docs/routers/access/sw_activation/SA_on_ISR.h...
Hi Muhammadusman, At very basic you use static routes if your switch have routing licence can you routing protocol (Rip , Eigrp or OSPF).You can just use vlan 1 for peering between to switches. Br.Mohseen Patel
Hi Hans,For instance link on which server is connected is Tegig and up link switch this is 1 gig then there would be bottle neck and performance issue when server can generate tengig of traffic but up link can only support 1 gig. Br.Mohseen Patel
Hi Seb, On 4500 (Supervisor Engines 8-E, 7-E, 7L-E, 6‑E and 6L-E) supports MQC QOS this tool can be use for traffic classification on basis of that you can perform with treatment like Prioritize , Shape and polices. This example shows how to config...