Does anyone know the OID to determine the number of registered AP's on a WLC (specifically the AIR-CT2504).I've got both of the Airespace MIBs and have browsed through them but I can't seem to find the correct location. I can find a list of all of t...
I'm trying to find the MIB for the WRVS440N that I have.Specifically, if anyone knows the Memory and CPU OIDs that's what I'm wanting to monitor specifically...if anyone knows where the MIBs are that'd be ideal so I can monitor additional stuff as we...
Hello all.I'm running CME 4.2 and am trying to setup a page all broadcast to both IP phones and an overhead speaker by dialing one dn.I've tested both the IP phones and the speaker separately and can dial their specific dn's and get the paging featur...
I've got 5 sites each with CME running on a 2811. The default MOH (music-on-hold.au) has been working w/o any problems. We have had a professionally produced MOH file (in .wav format) that we would like to get into all the systems.I've gone in an u...
for those that are stumbling across this down the road trying to get plink w/ IOS commands to work - like me. I just wrote a batch script where the individual commands are sent. it's a bit more work but it at least makes plink workable for multiple...
That is correct.I opened a case with TAC and determined that there is not a way to put both paging systems on one DN (which was my initial desire.)TAC relayed that this might be a feature in the 4.4 release of CME but that there were 3rd party applic...
I had a couple of things wrong.1)I hadn't encoded the .wav file correctly to play.2)I also had the E&M turned on to play MoH. If both E&M and telephony-service are configured to play different MoH files (or sources) the E&M wins.
Per Cisco, that is the only way to 'refresh' the speed dial list.http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/command/reference/cme_b1ht.html#wp1011188
