Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I upgraded a UC540 to 8.1, and my any connect client stopped working...I can get to the website, but when I hit start anyconnect, nothing happensIs this normal, did the upgrade delete my anyconnect client on the flash?If it did, can I connect remotel...
Does anyone know if this works on the 857, tried it and it kicked me out of the routerip nat inside source static 192.168.60.10 172.16.181.195 route-map MAP extendable 2. Define the port rangeaccess-list 101 permit tcp host 192.168.60.10 range 8000...
I cannot get my VPN client v5 working with myasa, everytime i try to connect I get "the remote peer is no longer responding" reason 412Here is my configASA Version 8.3(1) !crypto ipsec transform-set certvpn esp-aes esp-sha-hmac crypto ipsec security-...
I have a asa 5505 setup with a single IP address, I need to do PAT for my internal web server and also need to support ssl vpn witht he anyconnect client. I can get the connection working, but I cannot ping from my vpn pool to my internal addresses,...
Hi,I have a CM 4.1 (2) and a variety of voice gateways. All my 3745 and earlier routers work great, all the new 28xx and 38xx routers have this issue. When we dial outbound calls on the routers and I put the call on hold, the caller gets a really l...
Ok, then changing the tone on hold timer to 200000 or 0 should get rid of the beep on any call for the MGCP gateway.....I had to change the additional setting because I have H223 Gateways.
If you want this to work for any calls. You have to also change the "send H225 user info message" as per my previous post if you have a H323 gateway....otherwise if you recieve a call that comes in via a H323 gateway connected to the PSTN, the perso...
Ok, I have the answer....this is what you have to do on 4.1(2) SR1Go to service parameters and change the "tone on hold timer" from 10 to 200000 This will eliminate the beeping noise on all internal calls.To eliminate this on any H323 gateway pstn c...
Hi,I am having the same issue with the same version and a h323 gateway.....when I set the tone on hold timer to 200000, it disables the tone on any call from phone to phone, but if i gout out the h323 gateway I get a beep still....any ideas?thanks
