Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,to grant not to show the certificate error adevertise to all clients connecting to guest services (because obviously they don't have the CA root certificate of our company), we have purchased a wildcard certificate from Verisign in order to work ...
Hi, I have activated https server in a NAM following the procedure in http://www.cisco.com/en/US/docs/net_mgmt/network_analysis_module_software/3.6/switch/configuration/guide/getstart.html. After I have loaded successfully the patch, I try to activat...
Hi everybody,I have a NAM in a 6509-E chassis with sup720, and every time I reset this module it boots with its maintenance image instead of with its application image. The only way I have meneged to boot the NAM with application image is with the co...
Hi everybody,I have a NAM in a 6509-E chassis with sup720, and always I reset this module it boots with its maintenance image instead of with its application image. The only way I have managed to boot the NAM with application image is with the comman...
Hello, I have to configure a router 3845 with one NM-HDV2-2T1/E1 and two PVDM2-64. I have typed the following commands: (router-config)# card type e1 1 1 (router-config)# controller e1 1/0 (config-controller)# pri-group timeslots 1-31 And the router ...
Hi lavramov,I have checked the configuration and really the hostname is not the same that th CN in the certificate:ip host "localhost"ip domain "i-csnam-simb-c03.tsm.inet"So, have we to change the certificate CN to localhost??Thank you very much,LUIS...
I have requested the show configuration output to confirm the hostname, but the prompt is root@localhost.i-csnam-simb-c03.tsm.inet so i supose the hostname is localhost.i-csnam-simb-c03.tsm.inet, isn't it?Regards,
Hello everybody,I have a high cpu utilization problem too. I have a Cat6509 with Sup32-PISA-10GE and when I upgraded from 12.2(18)ZY2 to 12.2(18)ZYA and switch booted, the following process was utilizing CPU at 99%:140 3426368 21182 16175...
