About jalen

jalen · 03-27-2018

Hi Experts Only use N5672 * 4 not include ACI to design the VxLAN topology The topology have any problem ? Is't work fine ? 1. VxLAN Betwn Two Site 2. N5672-16UP *2 per Site 3. four N5672-16UP use 10G Fully Mesh Connect

jalen · 12-30-2015

Hi on A9K-RSP440-TR module "Two 10-GE Small Form-Factor Pluggable Plus (SFP+) virtualization cluster ports" can normal traffic connect OR "virtualization cluster" purpose ONLY ??

jalen · 04-12-2015

Hi ProUCS C220 M3 now Bootig at "Config..." Screen and cycle ;but the CIMC is OK can access from web

jalen · 03-20-2011

dear ExpertsThe CISCO1941 Router can't registrat to the CM , how to troubleshooting...R19-WEX#waas cm-register https://10.202.250.200:8443/wcm/registerR19-WEX#*Mar 21 11:44:45.383: %WAAS-3-WAAS_CM_REGISTER_FAILED: IOS-WAAS registration with Central...

jalen · 01-19-2011

dear ExpertsHas any 3rd party software can generate report from idsm-2 module ?

jalen · 03-22-2011

dear MikeI'm not forget the step 3 ; now i erase and re-config it but still can't ..R19-WAE(config)#crypto pki trustpoint WCMR19-WAE(ca-trustpoint)#enrollment terminal pem R19-WAE(ca-trustpoint)#exitR19-WAE(config)#crypto pki authenticate WCMEnter t...

jalen · 09-13-2006

Dear AnkurThank you answer .That is type error,i will config 1 ACE per 1 ACL per port

Member Since	‎01-17-2001 07:03 PM
Date Last Visited	‎12-04-2018 05:16 PM
Posts	8

User Statistics

User Activity

VxLAN Design

A9K-RSP440-TR 10GE

C220 M3 problem ( Boot Cycle at "config...Screen)

WAAS Express registration troubleshooting

IDSM-2 Event Report Software

Re: WAAS Express registration troubleshooting

Re: L2 switch use L3 ACL