Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Most of the documentation I've found on this subject deals with 1 ASA with multiple ISP connections. Here is my scenario -192.168.0.1/24 - ASA1 - ISP1 - \ ----- site to site VPN ------ ISP - ASARemot...
Hi,I recently installed a 3750 switch and cannot telnet to it from any workstation. However, I can telnet to the new 3750 from another 3750 switch stack.My workstation can ping the switch and the switch can ping my workstation. Same holds through for...
Our primary ACS VM appliance has begun bootlooping with no real explanation available from our logs or TAC exploration. Luckily we have a secondary server picking up authorizations right now. However, I cannot promote this secondary server to primary...
We're in the process of upgrading our wireless controllers and just doing a general clean up of our wireless envrionment. Currently we do MAC filtering through ACS with a built in database. The version of ACS is antiquated so we are looking for repla...
We have approximately 150 1142 LWAPP's deployed in our facility. Recently we started getting complaints about speed issues (90% are using G 10% N). Upon investigating we found that the speeds are flucuating rapidly. Everything from 54Mbps down to 1Mb...
Thank you, this led me in the right direction. The switch is running OSPF. In my configuration of passive-interfaces I forgot to exclude the interface vlan1. Once I added that as an exclusion, I was able to telnet to the switch.
Thanks for the reply. Unfortunately that was standing right next to an AP. I'll need to do like you said and map the MAC to an AP and see what is reading from where.Also, I learned today that I cannot disable the B rates as we have 200 propretairy de...
I'm willing to disable the speeds (will probably wait until Monday, though) however the clients are connecting at 54mbps (usually) and then bouncing back and forth after a connection is made. My understanding of the speed settings were that a client ...
