Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have been downloading files to TFTP server, modifying them (Not the SSH section) and TFTPing them back to the startup config. But when i reboot the router I need to regenerate the Keys for SSH to work with the following command.crypto key generate...
I find that when I upload a whole new config to a router with tftp that I then have to go back and add the following linessnmp-server user sxxi-sxxs_SNMP=sxxxxxQ SXBI v3 auth md5 TaXXXXXXEsp&chEZ ANDEnable SSH crypto key generate rsa768 And when you ...
Is it possible to NAT some traffic to a subinterface and not NAT other traffic to the same interface.I need to have two source addresses for the same device which can ontly have one IP address.I need to have the IP address's 10.18.21.200 and 10.17.21...
Hello allOur network has developed over the years to a point where I have 4 seperate networks at each branch. Secure Data, Management, Vendor and VOIP.Secure Data is used for uers to access the mainframe and do daily tasks including the internetManag...
HiI have twenty sites. all are up and runnig on Verizons PIP network. One of the sites is our primary site providing WWW and core processing. Another site is a DR site which has WWW access incase of a disaster at primary site.The networks routing pro...
It looks to me like Import all imports optional parameters from the DHCP server. If, the ISP DHCP server is not passing a static default route, then the router will have no routing table except for connected, and will not be able to get any futher th...
What that means is that a backup of the config is useless for restoring a router it is strange that radius is in the config and local users and passwords, why not snmp user?So could crypto key generate be in the uploaded config?Thanks for the reply t...
Thank you for your quick response. I did actually review that page, but I feel my situation is more complex because the old address and the new address are on the same network segment. I need traffic coming from the s0/0 interface destined for 10.17...
Thanky ou very much for your extensive answer. LOL when I posted I read the forum as Security VLAN not VPN...Is there a GUI or Visual tool for managing the ACL's? Cisco Configuration Proffessional for example?Ashley
