Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hey Everyone:Just after some help with an ASA 5510 QoS config for our lab. Trying to set-up a priority queue for Voice and Video traffic, below is the current ASA config. The WAN link is 6mb, trying to limit the Internet traffic to 4mb and save 2mb f...
I was just wondering if anyone could help with a quick question. From an 8945 can you dial an addresses like conf@conf.com used for video conferencing? Or can you only dial phone numbers? Not had much work with them, just want to know the feature set...
Hey All:Im having an issue with some 7925G, the A / 5Ghz inside works like a dream, when we go outside the phones start going crazy, we have 1310G's outside using 2.4GHz, the phones just wont roam. If you stand 30 metres from the external AP towards ...
Hey All:Ran into a strange issue today, two 2504 controller's, one upgraded (from 7.2 to 7.0 due to 1310 not working) to the new firmware fine, the other chucks back a signauture issue, i've seen alot of post's about the 5508 having this issue, but n...
Hey All:I've browsed the previous articles about meetme password protection. Is anyone in a position to advise on the Unity Express side of the Config? Especially about the custom script for getting the user to enter a password?I have the CME bit nai...
Hey Hey:I would be more than happy to help a fellow engineer out with advice on the script and pointer’s in the right direction, but I’m not going to post the full script online for everybody. Since developing the script, I’m offering password protec...
show service-policy priority has NO output, no error's, just no output-------sh service-policy shapeInterface outside: Service-policy: shaping Class-map: class-default shape (average) cir 3584000, bc 14336 (pkts output/bytes output) 137...
The strange thing is, with have about 6mb bandwidth, video call's and conferences below 2mb are crystal clear, as we have restricted the other traffic to 4mb max via the shape, almost as if they are getting the reversed 2mb bandwidth, but they don't ...
I lowered the number to 2960000 which by my calculation is just under 2mb and still no traffic hitting the PQ. I also removed the class inspection_default with the number at 2960000 and still no joy.cheersMatt
Just want to say in closing this chain. It took me a while, but i created a custom script which asks for a passcode, the meet-me is now passcode protected, it wasnt easy Matt
