Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I've upgraded a PI 1.3 installation to PI 2.1 using the migration method (taking an application backup, creating a new VM using the 2.1 VA of proper size, doing the basic configuration to replicate that of the old machine and finally restoring th...
Hi,for obvious reasons the protection of NTP servers exposed to the Internet is currently getting some reinvestigation. On a fresh 4500-X running IOS-XE 03.04.03.SG (aka 151-2.SG3) I encountered thataccess-list 12 permit x.y.z.123access-list 12 permi...
Thanks for the clarification, the port licensing was the largest missing piece in the picture here - now it's clear. The pricing is still going to be a hard sell, though - unless the 1RU and power saved is at one's utmost priority. It may well be, an...
It's now in CCW, but I'm stunned by the fact that it's essentially more expensive than the 1002-HX. The base system is a tad cheaper than the 1002-HX base but only comes with 8GB RAM, after upgrading that to 16GB they are on par. And while the 1002-H...
Hi,
same issue here. On every 3650 I have access to. Output errors count output discards (which seems wrong, never saw that before on Cisco gear, and I deployed plenty). Example from SNMP:
IF-MIB::ifOutDiscards.16 = Counter32: 652000252
IF-MIB::ifOut...
Re,my new TAC engineer solved the case by finding CSCuj32554 which is about old wcs*.lic files in the licenses directory breaking the migration. It also contains a procedure for cleaning up the mess which worked out (with some adaptation, due to fall...
cdemont wrote:Exactly experiencing same issue and I was told from Cisco SE that the feature may be introduced in 9.6 (so before 10.0). Hopefully that will be the case because in our project with 1200 locations all calls are being routed via hunt grou...
