Hello, please need help setting up RSPAN between Catalyst 65500 and Catalyst 3560.
I have configured the following command on both switch's but I'm not receiving any data in sniffer.
6K5
VLAN Name Status Ports---- -------------------------------- ---...
Hello,
I've configured a CME in sip registrar mode and need that when a user from one particular extension call another extension the call is forwarded to a mobile phone but don't want to display the forwarded number in the user phone that initiate...
Hello, I know this thread is quite old.
But I need your help, I´ve configured two N5K and they're sharing the same vPC domain... and the peering Keep-alive is attached into mgmt0 in case of failure of one Keep-alive link all vPC(Port-channel) become...
Hello,
I'm configure posture in ISE for VPN users using any connect but client fail while trying ti download the software from portal.
Please help,
Regards,
Hello,
I'm trying to configure posture on ISE 2.0 for VPN users coming from ASA 5515-X version 9.2 and I'm stack on Client Provisioning Policy, have uploaded the Anyconnect on result>clientprovisioning... but in policy>clientprovisioningpolicy when...
Hello Richard, in my scenario I've two N5K sharing the same vPC domain but when the peer keepalive fail the switch that is accessible via mgmt0 port shutdown all the vPC's. what is going wrong in my configuration?
Regards,
Lucas