Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We are running a 7510 FlexConnect controller in an HA environment. We recently upgraded to code 7.6.130. After the upgrade, we have clients (RF handheld scanners and truck mounts) in our warehouses that are getting disconnected, pings fine then dro...
Let me start by giving a brief description of our situation:We have aquired new space in our DR facility that is not in our current cage. A new fiber run was installed to our new space. Roughly 500'-700' run (Multimode OM3 fiber was used). There i...
I have a question regarding EnergyWise. At the moment, I have EnergyWise enabled on a handful of switches in out network for testing purposes. I have an Avaya IP phone on one port and a Cisco 1242 AP on another. It seems that the only power levels...
Not a recommendation from TAC, we had success using 7.4, the higher-ups just wanted to get back to stable code as the issue was impacting our production. Didn't want to risk going to 8.
I also have a similar issue.We have our servers set up with a teamed nic. One nic connects to Switch1 and the other to Switch 2. (for High Availability)Both switches are 6509's.Configuration for the switchports are:swsw mode accesssw access vlan XX...
