About Joseph Chambers

Joseph Chambers · 03-11-2013

CME 8.6under telephony service will service phone webAccess 0re-enable it?Is there a DST issue with this too?

Joseph Chambers · 11-09-2011

I'm having an issue where ftp is allowed out, but is dropping on the way back in.seeing Dropping tcp pkt 209.95.232.144:20 => 192.168.0.11:62589Does that mean an ACL is dropping and not the ZBF?

Joseph Chambers · 04-09-2011

Running CME 8.0 with PRI.Wireless callers' name is always "WIRELESS CALLERS".Is it possible to manipulate incoming callerid name to something else?

Joseph Chambers · 02-09-2011

Does CCA 3 support adding a SPA8000 (8port FXS Server)? Or any SIP devices?

Joseph Chambers · 02-09-2011

Can you add 2nd T-1 card in expansion slot and use all 24 channels? UC560Product Reference Guide says you can.

Joseph Chambers · 03-29-2013

A,c, & dSent from Cisco Technical Support iPhone App

Joseph Chambers · 11-10-2011

No worries. Asa is so much easier to deal w vs zbfSent from Cisco Technical Support iPhone App

Joseph Chambers · 11-10-2011

that didn't fix it.Never mind, I dropped in an ASA today. Problem solved

Joseph Chambers · 11-09-2011

class-map type inspect match-all sdm-cls-VPNOutsideToInside-1 match access-group 116class-map type inspect match-all sdm-nat-user-protocol--1-2 match access-group 107 match protocol user-protocol--1class-map type inspect match-any sdm-service-sdm-pol...

Joseph Chambers · 05-04-2011

Were you able to use a Jabber client with the Mac?

Member Since	‎06-07-2009 02:42 PM
Date Last Visited	‎02-05-2020 12:25 AM
Posts	176
Total Helpful Votes Received	35

User Statistics

User Activity

6941 firmware 9.3(3) - Web access disabled - CME

zone based firewall - ftp

Change incoming caller-id name?

Adding SPA8000 to UC560

Can you add 2nd T-1 Card?

Re: Mobile Challenge 3/25/2013 – 4/5/2013

Re: zone based firewall - ftp

Re: zone based firewall - ftp

zone based firewall - ftp

Re: CUPC 8 Client for Mac