04-09-2011 06:52 AM - edited 03-16-2019 04:25 AM
Running CME 8.0 with PRI.
Wireless callers' name is always "WIRELESS CALLERS".
Is it possible to manipulate incoming callerid name to something else?
04-09-2011 08:12 AM
Can you post the output of "debug isdn q931"?
04-09-2011 11:04 AM
054160: Apr 9 09:19:50.265 EDT: ISDN Se0/3/0:23 Q931: RX <- SETUP pd = 8 callref = 0x0070
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98381
Exclusive, Channel 1
Facility i = 0x9F8B0100A10F02010106072A8648CE1500040A0100
Protocol Profile = Networking Extensions
0xA10F02010106072A8648CE1500040A0100
Component = Invoke component
Invoke Id = 1
Operation = InformationFollowing (calling_name)
Name information in subsequent FACILITY message
Progress Ind i = 0x8283 - Origination address is non-ISDN
Calling Party Number i = 0x2183, 'XXXXXX7534'
Plan:ISDN, Type:National
Called Party Number i = 0x80, '3200'
Plan:Unknown, Type:Unknown
054161: Apr 9 09:19:50.265 EDT: ISDN Se0/3/0:23 Q931: Received SETUP callref = 0x8070 callID = 0x09FF switch = primary-ni interface = User
054162: Apr 9 09:19:50.289 EDT: ISDN Se0/3/0:23 Q931: TX -> CALL_PROC pd = 8 callref = 0x8070
Channel ID i = 0xA98381
Exclusive, Channel 1
054163: Apr 9 09:19:50.293 EDT: ISDN Se0/3/0:23 Q931: TX -> ALERTING pd = 8 callref = 0x8070
Progress Ind i = 0x8188 - In-band info or appropriate now available
054164: Apr 9 09:19:50.461 EDT: ISDN Se0/3/0:23 Q931: RX <- FACILITY pd = 8 callref = 0x0070
Facility i = 0x9F8B0100A117020101020100800F574952454C4553532043414C4C4552
Protocol Profile = Networking Extensions
0xA117020101020100800F574952454C4553532043414C4C4552
Component = Invoke component
Invoke Id = 1
Operation = CallingName
Name Presentation Allowed Extended
Name = WIRELESS CALLER
04-09-2011 12:56 PM
It's coming in from the PSTN. I don't see/know a way to strip that off.!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide