Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi there,I want to know if it is possible to reach a server via own WAN ip address on dialer, using a internal LAN device.So lets say Y is wan and X is LAN. I am a client in X i want to reach Y on port 80, not internal but external. so i browse to Y:...
Hi,Is it possible to use a cisco router, in this case a cisco 887, to bridge an external ip address to a device behind the router?I need this because i only get 1 IP Address from my ISP and i want this IP address on my ASA.I was thinking of a bridge ...
Hi there,I've got a problem with DHCP running on a cisco 1900 series router, 1921 to be precise. The Data VLAN works perfectly, i configured a ip helpder addressand its working. Problem tough is VLAN 20. This is the voice vlan. As u can see in the co...
I have a question regarding an ATA 186. I want to connect this ATA 186 to a UC540 wich is on another location.We have a Cisco 887 on the remote location and i want to make a IP SEC tunnel between the UC540 and the 887.Is this possible? If yes can i g...
Paul,That's not the problem. I allready did the NAT statements. and the server IS reachable from another external ip adres not port of this clients subnet. Only problem is from inside to outside and that outside routes back to inside.
Hi Blau grana,Your post does not seem te relate to mine very well. And i still do not know how we can make this possible..The problem: Client has a server that can not be reached internally (security) thus must be reached from the outside..
Well its a dsl atm connection that means its a pppoa connection. I want to test this configuration with my pc connecting to the interface of the router.On my pc i can make a pppoe network and use the credentials of the ISP. Would this work or wouldnt...
Hi John!Why would i need to create a BVI? And on a lan interface i can not issue bridge-group one, this has to be stated on the VLAN. So this would be more like: interface ATM0.1 no ip address no atm ilmi-keepalive bridge-group 11 pvc 0/33 encapsula...
