Hello All,
I've multicast issue, when i use different vlan.
The group adress is 239.192.1.1
On 3850 :
I've enable IP PIM sparse mode enable on INT VLAN 7 ET VLAN 3
RP adresse10.1.8.254
On SG500 L2 :
Ip igmp snooping only enable
here is the c...
Hello All,I've little problem when I call from outside with my MOVI/Jabber client to one of my vitual mcu rooms. I've this setting on my VCSs: VCS-C: traversal zone:check credentielDefault Zone:check credentielDefaultSubzone:threat as authentificated...
Hello All,I am trying to integrate our Cisco VCS Control and Microsoft Lync server but cannot get it to work. Indeed in the documentation (Cisco VCS X7.0 Microsoft OCS 2007 R2 Microsoft Lync 2010) I've see that you have to create Trusted application ...
Hi All,Does anyone has already try to create several autoattendant and put restriction for avoid move from one to another even if you use ID of the auto-attendant.One of my customer has two autoattendants and I would like avoid from one access to the...
Hi All,Someone can confirm me that if the VCXexpressway doesn't have licence non-traversall and I make call the call between 2 endpoint register on the VCSx the call will be automatocilly transformed on "traversal call".http://www.cisco.com/en/US/doc...
Hello Guys, Hello Guys,I'm back from the holidays.I've done some test and i said a big mistake. Sorry for this huge mistake!!! here is the situation:On the CORE, if i plug a VLC player on VLAN 7 it works but it doesntnt works in all other VLAN.There...
hello Paul,
I'll try to do port mirroring trace in order to have all the information.
If i understand you need a port mirroring from the Server who sent multicast and also from the VLC client on vlan 3 who ask the stream.
DO you need something else...
Hi,
Already done last week and it doesnt change anything.
as you have noticed querier is not enable also for vlan 7 and it works.
i've enable it
SW-EST-1(config)#ip igmp snooping vlan 3 querierSW-EST-1(config)#exiSW-EST-1#sh ip igmp snooping int...
Hello Paul,
thanks for your help.
Here is the command I've on the switch about IGMP:
SW-EST-1#sh ip igmp snooping cpe customer premises equipment. groups Group of multicast addresses learned by IGMP snooping inter...
Hello Paul,
The issut is not on the player host.
Indeed as is said before when i take the player who doesnt works and plug it direclty on the core switch on vlan 3 the stream works therefore the player is working.
I've an issue only when i use the ...