I've little problem when I call from outside with my MOVI/Jabber client to one of my vitual mcu rooms.
I've this setting on my VCSs:
VCS-C: traversal zone:check credentiel
Default Zone:check credentiel
DefaultSubzone:threat as authentificated
VCS-E traversal zone: threat as authentificated
Default Subzone on the VCS-E: 'Treat as authenticated
SubzoneJABBER:MOVI:do not check
Default zone:Do not check
Authentification VCS-C:local database or AD
Authentification VCS-E:local database
The authentification works fine when external Movi/jabber register on the VCSexpressway it arrive on the JABBER/movi SUBZONE the vcsExpressway send to the VCS control to check the authentification and it works.
My question is about the call policy indeed I've done a CPL on the VCSX where :
Unauthenticated User----->8(\d{3})@video.comiris.com--->reject
"unauthentificated user" is for me all external users not belong on my company, but when I try to call this 81234@video.comiris.com with my movi or jabber client from internet i'm rejected by the VCS-E and in the vcs log i See "forbiden' because i'm unauthentificated.
My question is how can I authenticated with external movi through expressway? Today I thought i was authenticated because if i put a bad credentiel i cannot connect with my client movi therefore i thought i was authentificated but it seems not.
Thanks by advance
