Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello All and tahnks for reading my questionI have a home office with multiple VLANS/subnets I have many VPNs that connect only a specific subnet to a specific remote offfice. On a 5520, can I create a S2S VPN to different remote offic...
Hi AllI am trying to configure access to several remote offices for users who VPN into our main datacenter. The datacenter has a 5520, and the branches are connected through IPSec L2L VPNs. Branches all have 5505 or 5510's. Remo...
Hi I have a network scenario exactly like the one described in this article, with one exception. http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00806e880b.shtml(i have also uploaded the network diagram from...
Hi -I have a network with a 3005 concentrator and PIX 515 in parallel. Thre is a router on the public side of the PIX/3305 that also connects to my ISP. There is another oruter in front of the PIX/3305 that acts as my internal network default gatew...
Hi all -I have a network with a 2600 connected to the internet (T-1). The ethernet port on the 2600 is connected to a PIX 515 The public interface on the 515 and the 2600 ethernet interface have public IP addresses, and the private interface has an ...
Thank you for taking the time to reply!I do have an extra public address, so the first option sound best. Since I have 70 users, i would rather not use static routes on the PCs, but would like to use a router. I am still confused as to the correct i...
