09-04-2020 03:32 AM - edited 07-05-2021 12:28 PM
Hi;
In our environment we use 1800,2800,2700 series ap on 8.3.143.0 software. So we use standart bundle software. Now we supply four 1532 series outdoor ap. According to release notes for registering 1530 series we have to install different ap packages software. I download secondary packages but i am i little confused.
If i install secondary packages , am i face any issue about the other ap series (1800,2700,2800 etc.) ? Also is there any trick while importing ap software packages ?
Best regards
Umut
09-04-2020 04:00 AM
No trick it is just the remaining AP images needed for your AP to download the code from the WLC.
Previously such packages did not exist but as code got robust, we needed to separate that.
09-04-2020 04:08 AM
Thank you.
09-04-2020 04:08 AM
can you connect to console and post the complete registration logs to understand, (since you mentioned already checked compatability matrix ) ?
09-04-2020 04:29 AM
*spamApTask1: Sep 04 14:24:49.664: [SA] 88:90:8d:93:b4:a0 State machine handler: Failed to process msg type = 3 state = 0 from 10.50.3.46:53677
*spamApTask1: Sep 04 14:24:49.665: [SA] 84:b8:02:ad:1a:b6 Failed to parse CAPWAP packet from 10.50.3.46:53677
*spamApTask1: Sep 04 14:24:49.708: [SA] 88:90:8d:93:b4:a0 Unsupported Ap Type !!!Failed to open file for image data transfer /bsn/ap//ap1g3
*spamApTask1: Sep 04 14:24:49.709: [SA] 88:90:8d:93:b4:a0 Failed to process file for image download to 10.50.3.46:53677
*spamApTask1: Sep 04 14:24:49.709: [SA] 88:90:8d:93:b4:a0 Image data: Unable to encode Image Data message element
*spamApTask1: Sep 04 14:24:49.709: [SA] 88:90:8d:93:b4:a0 Failed to encode Image data request to 10.50.3.46:53677
*spamApTask1: Sep 04 14:24:49.709: [SA] 88:90:8d:93:b4:a0 Failed to send image data request to 10:50:3:46:53677
*spamApTask1: Sep 04 14:24:49.709: [SA] 88:90:8d:93:b4:a0 State machine handler: Failed to process msg type = 15 state = 5 from 10.50.3.46:53677
*spamApTask1: Sep 04 14:24:49.709: [SA] 84:b8:02:ad:1a:b6 Failed to parse CAPWAP packet from 10.50.3.46:53677
09-04-2020 04:58 AM
can you check if the new bundle was installed correctly: show ap bundle all
09-04-2020 05:25 AM - edited 09-04-2020 05:32 AM
Everything is ok...thank you
also there is one more configuration needed.
i created ap policy to define ap mac address into wlc.
Primary Version : 8.3.143.0
AP Supplement Bundle : Installed
Primary AP Image Size Supported AP's
---------------- ---- ------------
ap1g1 13120 AP700
ap1g2 13080 AP1600
ap1g3 15160 AP1530
ap1g4 23308 AP1850/1810
ap1g5 19076 AP1815
ap3g1 9948 AP3500
ap3g2 14972 AP2600,3600,1700,2700,3700
ap3g3 28364 AP2800,3800,1560
ap801 8396 AP801
ap802 9896 AP802
c1140 8836 AP1140
c1520 7492 AP1550
c1550 10868 AP1550
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide