Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have a UC540 and updated it to the latest IOS version with the latest firmware to my phones and i am having registration problems with SPA525g IP Phones. I updated the firmware of the phones as well and create manual tftp bindings with but s...
Hi,I have a UC540 and updated it to the latest IOS version with the latest firmware to my phones and i am having registration problems with SPA525g IP Phones. I updated the firmware of the phones as well and create manual tftp bindings with but still...
Hi guy's I am trying to setup a voice mailbox to my users using CCA 3.0 on a UC560 Router and it is not working. Whenever I tried to open my messages using the voicemail extension that I define I just get a busy tone. I tried to login on Voice View E...
Hi Guys, I am a newbie on VOIP deployment and I need help on configuring a UC560 router for PRI lines. I have configured the telephone services through telephony wizard and out going is fine but incoming is not. Could you help me out on what i am mis...
Hi John,This is configured as the inside of the network, and it is connected directly. I can see the MAC in the CDP neighbors and when I check the phone it has the proper VLAN ID, IP and TFTP details. I have posted this also on the IP telephony secti...
Thanks for the repz Mr Anas Abu Eideh,I will try this configuration and update you, i think this make sense because the other IP phone that i have which is SCCP are registering perfectly , i will try this and get back to you the result. thanks
Bind them manually with TFTP-server with an Alias command:conf t>tftp-server flash:APP6901SCCP.9-1-1-0.zz.sgn alias APP6901SCCP.9-1-1-0.zz.sgndo this to the phones firmware then generate a new cnf file (telephony-services>create cnf)the phones dosen...
I had this problem before when I deployed AVAYA IP Office and Phones with cisco switch This is what you should do:AVAYA IP Phones recognize only LLDP protocol not CDP so just run LLDP globally switch#(config)lldp runthen check if w/ switch#show lldp ...
