Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi experts,In our CUCM7.0.2, a manager has a DN (line 1) on his 7970 which is also configured as a shared line on his assistant's 7960 (line 2). When trying to ring out from his 7970 (using a desktop CTI client), the phone call is going out from his ...
Hi netpros,The intended setup is for a Cisco ASA5520, sitting behind a internet facing router (cisco 3825), to terminate a IPSec VPN l2l tunnel.The static NAT from the ASA's private interface to a public IP address is performed by the 3825.Testing ha...
Hi experts,Ever since our HUM was upgraded from 1.1 to 1.2..there is this strange behaviour where the Interface Utilisation template on an existing poller (which worked without a hitch in 1.1) would produce no data for 1-2 days, then working again fo...
We have 2 x ACE4710 appliance running in redundant mode, with LB1 hosting an active Context1 and a hot standby Context2, LB2 running a hot standby Context1 and active context2 - essentially to spread the load across the 2 boxes.they'd been running wi...
Dear all,A typical http probe is configured on an active serverfarm but somehow the probe is failing.Upon investigation (show probe <> detail)..it is found out that the http probe is not just interogating port 80 but also port 443 on the rservers. Th...
We managed to resolve the issue ourselves. In contrast with CUPC8.5, which does not necessarily need a manually configured client configuration file for it to work, Jabber mandates it. So for those guys who had contact photos working with CUPC8.5 ...
Judging by the number of views on this thread, there are quite a number of people having the same issues. Just like share that the problem still persists with Jabber for Windows 9.1.1. This issue has now become a showstopper for us to upgrade from CU...
Hi guys,Glad I found this thread. I have exactly the same issue with Abhi at the moment with my Jabber client. Photos are stored and retrieved on a standalone HTTP server, works perfectly with CUPC (8.5.1) but not Jabber (9.0.1). I'll be watching thi...
Hi Bill,Thanks for your response. The CTI client in use is called IPFX. And you're right, the integration is done by way of user association. Both devices has the right association as far as I could tell.The shared line is working correctly for incom...
would like to continue this thread again, wish I could do this earlier but was on annual leave.Thanks Patrick for clarifying my concern, good to hear that it's not a topology issue.The remote end is a freeswan/openswan running on a Linux box. The pee...
