Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
- I have a WLC5508 running 8.5.140.0- I have our primary/production SSID on VLAN1 with RADIUS authentication managed through Windows group policy. The domain controller is the RADIUS server. Encryption is WPA2.- When I place a laptop in the correct...
I'm a seasoned admin, but I'm bit new to enterprise level wireless networking so please bear with me. I've searched on this topic for quite a while and have not come up with anything. I have a WLC5508 with SmartNET on code 8.5.140.0. I have qty 8 o...
Our facility uses a well-entrenched NEC DSX key telephone system. The system supports up to 32 VoIP extensions in addition to a few dozen analog and key handsets. I have successfully deployed 18 VoIP extensions using three SPA8000 units with great ...
At our company HQ we have a small block of public IP addresses. Currently using only one of them, configured as the gateway IP address on the network edge. We run in-house Exchange which utilizes port 443 for incoming connections to the webmail cli...
I'm trying to perform a certificate request on a 1921 router. I've followed the wizard using Cisco Configuration Professional several times. First I created a 2048 RSA key pair, then used the "Cut-and-Paste" wizard in CCP to generate the CSR using ...
Hi Rasika. I eventually discovered that because my infrastructure SSID has a space in it, some of the configuration steps would reject my commands. Perhaps I did not need to match the trustpoint name to the SSID, but I was trying to match your meth...
Looks like either your reply or my original post was marked as SPAM. Not sure why. You post was helpful, I got farther but I'm still not connecting. Having an issue with association or EAP. Hopefully they revive the post so we can continue.
Interesting approach, the rate limiting could work to reduce bandwidth used, but as you pointed out, if a guest client is downloading large files more slowly while still occupying the channels the AC clients are on then we haven't really improved the...
This is interesting, and certainly one way to solve the problem, so thank you both. It sounds like this removes the 5 GHz band from those WLANs. Is there not a way to limit those WLANs to B/G/N while still allowing 5 GHz on the N protocol? Thanks ag...
It appears the sunset date for new service attachment on the VG224 is already past, April 23, 2016.
It's extremely unfortunate that I have essentially no option other than to attempt to return the device to the vendor when the issue seems to be ver...
