Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,Is there anyone experienced deploy OTV using ASR 1001 between 2 datacenters? We want to acquire HSRP localization there, but at this moment I can only see lots docs are saying how to do this on N7K, not ASR. I saw it has a FHRP filtering enabl...
Hi All,I have 2 sites(Site A & B) using CME 8.6 for each and working perfectly before, now we implemented the third site(Site C) and using CME 8.6 also, now the problem is we cannot transfer call from C to A/B, but the users in Site C can dial Site A...
Hi All,Anyone have experience on triggered failover on VSS deployment with 1 VS-720-10G-3C in each chassis?I tried using "redundancy force-switchover" but after that the 20G VSL is flapping up & down and cannot be up normally,we got 1 FWSM in each ch...
Hi,There is some questions about 6500 Dual-Supervisor (Single Chassis) failover functions, hope that someone can help:)1. We now have SupA & SupB in the chassis, due to some mistake we have same IOS version but different feature set on them, although...
Hi All,Did someone met the following log message on secondary ASA console output when turning on the ASA failover function?"Mate's service module (CSC SSM 6.6.1125.0) on slot 1 is different from mine (CSC SSM 6.6.1125.0)"After that the secondary cann...
Same result here, we have pair of ISE 1.3 configured as HA, and once the primary ISE down, the secondary ISE cannot show the CWA to new-joined WLAN client browser, before we are considering the radius timeout as we see similiar logs on secondary ISE....
Hi Bilal,Thanks for your prompt. It helps me a lot.Besides, we now have problems with OTV AED not capable, I have checked that the site bridge-domain is permitted on the internal interface of ASR, and I have put Join interface & internal interface & ...
Hi Aru,Thanks for your information, it really clear me a lot!But i forgot to mention that, when I use command line to trigger the VSS failover action, the new active supervisor cannot forward out the traffic to its next hop(FWSM) normally, this is ou...
Thanks for all you guys support!!! I know the procedure now, will go for it on next maintenance window.We are using VS-720-10G-3C supervisor right now, but didn't enable VSS at the moment, only 2 * VS-720-10G-3C model supervisor in the same chassis, ...
