Hi,
The Nexus 7710 is available in front-to-back only.
Does it mean the intake is at switch port side and the exhaust of hot air is via the FANS side?
Many thanks,
Kurt
Dear,
I just started a QoS implementation project at customer premises.
The following switches are in the path: Nexus 93108TC-EX and Nexus 93180YC-EX.
But I don't find any QoS information for these Nexus 9300-EX family.
What I need to know is:
- is Q...
Hi,A custyomer wants to implement hostnames up to 26 or 30 characters long on CAT6500 running IOS.Is this possible?What is the max length of hostnames? Is it platform and/or software dependant?Many thanks,Kurt
Hello,I am searching for technical documentation which describes in detail the conditions or situations a switch port is put in ERRDISABLE state.The switch is a Cat6500 running 12.2(18)SXD1.Many thanks for a quick reply.Kurt
Hi Ankur,I have already found the link, but I need detailed technical information like the thresholds, timers and parameters behind dtp-flap, gbic-invalid,link-flap, pagp-flap, psecure-violation, udld errdisable determination.Kurt
Oleg,You should use CiscoSecure ACS server for AAA purposes. I suggest to use a TACACS+ setup. On this ACS server, you can determine on group or on user level what access they have.Kind Regards,Kurt
Oleg,The prio number will determine in which order the policies will be checked.If one matching policy is found, then SA will be established.Suppose RouterA contacts B to setup a VPN, then it sends all his policies to B. B will look in his policies (...
Oleg,SYSOPT CONNECTION PERMI-IPSEC is needed to terminate a VPN on the PIX firewall. It is needed because it bypasses any ACL configured on the PIX.The command will not listen to ISAKMP (UDP 500): this will be done by ISAKMP ENABLE OUTSIDE.The comman...