Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I've problem with IP SLA probes between two different routers.2900 (c2900-universalk9_npe-mz.SPA.151-4.M4.bin) here is set "ip sla responder" onlyand2800 (c2800nm-advipservicesk9-mz.124-24.T2.bin) here is set two type of tests "udp-jitter" and ...
Hi,I need to configure the control plane policing at catalyst 6509e for prevent propagation network traffic by tcp:4899Policy is works, but I want to block all network traffic that was matched by ACL 109.!class-map match-any CoPP match access-group ...
Hi, my question is about how to allow access to local lan behind cisco vpn clientUsing:Cisco 5500 Series Adaptive Security Appliance(ASA) that runs software version 8.2Cisco VPN Client software version 5.0Can Cisco VPN Client inject a local...
This may be related to the license of 2900 router?Technology Package License Information for Module:'c2900' -----------------------------------------------------------------Technology Technology-package Technology-package Cu...
Hi,Configuration from 2900 router are below.I've turned on debug, and here are no any errors.2900#sh run | i ip slaip sla responder2900#deb ip sla err 02900#term mon2900#2900#2900#sh ip sla respo General IP SLA Responder on Control port 1967General I...
Hi, RayYou can use packet-tracer utility for resolve thisVRG-ASA5505# packet-tra in in tcp 192.168.20.22 2222 1.1.1.1 80andthere is "nat-control"?Regards, Vladimir
Hi, NamitI have seen this document, but I want allow secure access from corporate resources to local lan that behind the PC with Cisco VPNC via IPsec.Please loot at my simple network topology (figure attached).ip pool for vpn client is range from 172...
